LouisQuality aviation lights at a good price, people like your products.
JohnI just want to thank you for your professionalism. I received the marine lanterns, and everything is OK. I looking forward to work with your in the future.
ICAO Low Intensity 3W Aviation Tower Signal Light 10cd
|FAA Classify||L-810||Name||Airport Obstruction Lights|
|Operating Voltage||AC 85V~264V||Power Supply Frequency||50Hz～60Hz|
|Power Consumption||≤3W||Working Mode||Steady Burning, Or Flashing 20~60 Times/min|
|Light Intensity||Type B ≥32.5cd Type A≥10cd|
ICAO Aviation Tower Signal Light,
3W Aviation Tower Signal Light,
10cd Airport Obstruction Lights
Low Intensity Aviation Tower Signal Light
|Operating Voltage:||AC 220V AC120V DC24V|
|Power Supply Frequency:||50Hz～60Hz|
|Working Mode:||Steady burning, or flashing 20~60 times/min|
|Light Intensity:||Type B ≥32.5cd Type A≥10cd|
|Light Source Service Life:||≥20 years|
|Installation Size:||3/4inches or 1 inch, chassis install|
|Optical Ambient Brightness:||50/100Lux|
1. Integrated reflective optical structure, more uniform luminescence, lower power consumption.
2. Bird spike against bird drop.
3. Tower obstruction lights with international-advanced cold LED with low power consumption, high brightness and service life of light source reaching 100,000hours.
4. LED based on aircraft warning lights uae last 15 times longer than traditional light source, incandescent light.
5. About 96% less power than 116W incandescent light.
6. Major maintenance cost saving,Surge protection device inside light.
7. Strong corrosion resistance, Shock and Vibrations protection and UV protection.
8. Dawn to Dusk operating: Built-in photocell can let light work automatically at night, closed during the day.
9. 3/4inch or 1inch installation size and small volume especially being suitable for telecom and flag-pole installation way,and can be installed with base, can raise the strut.
10. There is one switch converting between Flashing mode and Steady-burning mode.
11. Five Years Warranty Period.
Attention / Usage Tips
1. Check whether the supply voltage does comply with the rated voltage of device.
2. Do not open it if the device is out of operation, in order not to be hurt by the internal high pressure.
3. After finished the installation, the personnel must check whether the device is in a good waterproof processing and whether the screw spikes are tight
4. Non-professional workers cannot do the device maintenance, in order not to expand the error and be hurt.
Telecom towers, GSM towers, Electric towers
Without mounting chassis